8
OPERATION OF CON-
TROLS
(See also label on inside of appliance front panel).
The appliance is fitted with the following controls:
CENTRAL HEATING TEMPERATURE
CONTROL
The position of this knob will determine the temperature of the
water delivered to the radiators between the ‘I’ and ‘MAX’ position.
When the knob is turned anti-clockwise past the ‘I’ position to the
‘OFF’ (Summer Position) the appliance is off.
FACIA MOUNTED PROGRAMMER (if fitted)
Your installer may have mounted a mechanical programmer into
the facia of your appliance. Operating instructions are supplied with
the programmer.
RESET BUTTON
Press and release this button if the appliance fails to operate - if
the appliance still fails to operate then contact Worcester Bosch or
your installer.
To Next Page
Loading...
