Bose Professional PowerShare PS604A - 4-Channel Configuration; Technical Information; LED Fault Indication

Technical Information
pro.Bose.com
24 English Installation Guide
POWER LED (both amplifiers)
Solid amber LED indicates an over-temperature fault
Solid red LED indicates a power supply fault
SIGNAL LED (both amplifiers)
All four LEDs will display solid red if a power supply fault is detected
LIMIT LED (both amplifiers)
Each LIMIT LED will individually display solid red if there is an EHF fault on that channel
LIMIT LED 1 & 2 will display solid red when the outputs are muted due to an amplifier one fault
LIMIT LED 3 & 4 will display solid red when the outputs are muted due to an amplifier two fault
All four LEDs will display solid red if there is a power supply fault
LED Fault Indications
Adaptable Power Amplier
LIMIT
SIGNAL
12 3 4
PowerShare
POWER
Figure 9. PS604A and PS404A
4-Channel Configuration
Figure 8. PowerShare Editor software 4-channel configuration for PS604A and PS404A amplifiers