10 - ENGLISH
SETTING UP THE BASS MODULE
Pairing with a SoundTouch® 300 soundbar
To wirelessly pair the bass module with a SoundTouch® 300 soundbar, you need to place
the soundbar into pairing mode using the remote control.
1. On the SoundTouch® 300 remote control, press the SoundTouch® button .
2. Press and hold until the connectivity indicator on the soundbar blinks white.
1
2
Once paired, the bass module emits a tone. The STATUS indicator on the back of the
module and on the soundbar glow white.
Note: If the bass module doesn’t pair with the soundbar, see “Troubleshooting” on
page 19.
To Next Page
Loading...
