ENGLISH - 13
FINISHING SETUP
3. On the SoundTouch® 300 remote control, press the SoundTouch® button .
4. Press and hold until the TV indicator and the Bluetooth® indicator on the
soundbar glow green.
1
2
The ADAPTiQ® process begins.
Note: If you don’t hear your language, press and on the navigation pad
to cycle through languages. To reset the language, press and hold for
10 seconds.
5. Follow the voice prompts until the ADAPTiQ process is complete.
If you hear an error message and are unable to complete ADAPTiQ audio calibration,
see page 21.
6. Unplug the ADAPTiQ headset from the soundbar and store it in a safe place.
If you later pair the surround speakers, move or mount the system or move any
furniture, run ADAPTiQ audio calibration again to ensure optimal sound quality.
To Next Page
Loading...
