Bose Acoustimass User Manual

20 - ENGLISH
TROUBLESHOOTING
Unable to complete
ADAPTiQ
®
audio calibration
Listen to the voice prompts for the following error messages:
Error
message
Problem What to do
1
The microphone on the
ADAPTiQ headset cannot
detect sound.
• Secure all cables.
• Disconnect the ADAPTiQ headset cable and
reconnect it firmly into the soundbar’s ADAPTiQ
connector.
• Ensure the microphone opening on the top of
ADAPTiQ headset is not blocked.
• Your ADAPTiQ headset may be damaged. Call
Bose customer service for replacement parts.
2
The room is too loud. Re-run ADAPTiQ audio calibration when the room
is quiet.
3
The ADAPTiQ headset is
too close to the speakers.
Move the ADAPTiQ headset farther away from the
speakers.
4
The listening locations are
too similar.
Move 1 – 2 ft. (.3 – .6 m) away from your previous
listening location.
5
The ADAPTiQ headset
cannot take measurements
due to movement.
Hold your head still.
After correcting your problem, you must re-run ADAPTiQ audio calibration
(see page 12).
If you hear a dierent error message, contact Bose customer service for further
instructions.

Bose Acoustimass Specifications

General

Connectivity	Wired
Satellite Speaker Dimensions	Varies by model
Subwoofer Dimensions	Varies by model
Satellite Speaker Weight	Varies by model
Subwoofer Weight	Varies by model
Frequency Response	Varies by model
Impedance	Varies by model
Power Handling	Varies by model
Connector Type	Varies by model
Color	Black
Configuration	5.1
Satellite Speakers	Yes
Subwoofer	Yes