EasyManuals Logo
Home>Bose>Speakers>FreeSpace 360

Bose FreeSpace 360 Service Manual

Bose FreeSpace 360
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
SPECIFICATIONS
PRODUCT DESCRIPTION
The FreeSpace
®
360P/360 is a full-range environmental loudspeaker intended for background
music and paging. There are three versions. The FS360P 70V/100V, 25W version has an internal
passive equalizer. The FS360P 4 Ohm, 25W version has an internal passive equalizer. The FS360
70V/100V, 25W version requires a Bose
®
FS360 active equalizer to be connected to or located in
the amplifier.
The FreeSpace 360P/360 can be installed in-ground with approximately one-half of the speaker
exposed above ground. It can also be permanently secured above ground on a horizontal surface
such as a deck.
External dimensions:
13.80" base diameter x 14.6" height
(320 mm base diameter x 370 mm height)
Weight (packed system):
12.0 lbs. (5.4 kg)
Internal cabinet volume:
Top enclosure: 142 cubic inches (2.3 liters)
Bottom enclosure: 659 cubic inches (10.8 liters)
Port:
Diffuser port: Tuned to 80 Hz
Three connecting ports: Tuned to 180 Hz
Impedance (nominal):
Non-passive version: 214 Ohm, 70V transformer @ 25W
271 Ohm, 100V transformer @ 25W
Passive version: 414 Ohm, 70V transformer @ 25W
852 Ohm, 100V transformer @ 25W
Non-transformer version: 4 Ohms
Power Handling:
25W (70V, 100V) continuous per IEC-268-5, 100 hour duration
Sensitivity (1W, 1M):
80 dB SPL, free field, per IEC-268-5 (for octave-band centered at 400 Hz)

Other manuals for Bose FreeSpace 360

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bose FreeSpace 360 and is the answer not in the manual?

Bose FreeSpace 360 Specifications

General IconGeneral
BrandBose
ModelFreeSpace 360
CategorySpeakers
LanguageEnglish

Related product manuals