Bose FreeSpace FS4CE

6 • English FreeSpace FS4CE • Installation Guide
PRO.BOSE.COM
Setup
Wiring the Loudspeaker
Wire Gauge
The FreeSpace FS4CE loudspeaker is designed to work with 18 AWG (0.8 mm
2
) to 14 AWG (2.1 mm
2
) size wire only.
Loudspeaker Settings
70V
2.5W 5W 10W 20W 40W*
8Ώ
5W 10W 20W 40W NC**
100V
** NC: No Connection (do not use)
* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
Connection Diagrams
Expose six millimeters (¼inch)
of bare wire to attach to the
terminals.
Note: Wiring method must be in
accordance with:
In Canada, CSA C22.1, Canadian
Electrical Code, Part I, Safety
Standard for Electrical
Installations, Section 32;
In the United States, The
National Electrical Code, NFPA
70, and the National Fire Alarm
and Signaling Code, NFPA 72.
Preparing the Installation
70/100V 8Ω
8Ω
8Ω
8Ω
8Ω
Using a Safety Cable
Some regional construction codes require the use
of a secondary method of securing loudspeakers to
support structures to provide additional safety. Choose
a mounting position, method, and hardware consistent
with local building codes and regulations.
Bose recommends using (1) a safety wire or (2) a safety
cable as a secondary securing mechanism. See the
diagram to the right for safety attachment points.
Follow the manufacturer’s instructions for any secondary
securing mechanism implemented.
qw