Bose L1 model 1S system

9
SYSTEM SETUP
English Deutsch FrançaisDansk Español Italiano SvenskaNederlandsItaliano SvenskaDeutsch NederlandsFrançaisEspañol
Positioning your system
Placing the power stand in the right location is an important part of setting up this product.
Determining the best location for your performance depends on several things.
• Size of staging area
• Number of performers
• Shared system (adding a T1 ToneMatch
®
audio engine and multiple instruments)
The following guidelines should get you
started in setting up for a concert or show.
• Set up your system in the rear area of the performance stage.
• If possible, position your system beh
ind the performer(s).
• If you are part of a group, avoid crowding together on stage. Allow some distance, 
ideally 7-8 feet (2.1-2.4 m), between you and the L1
®
system and another 
performer. This allows the sound to wrap around performers and reflect off adjacent
surfaces of the room, creating a more
pleasing room-filling sound.
Figure 1
Placement 
recommendations
Good
Better
Best
3 ft
(0.9 m)
5 ft
(1.5 m)
7-8 ft
(2.1-2.4 m)
3 ft
(0.9 m)
3 ft
(0.9 m)
3 ft
(0.9 m)
3 ft
(0.9 m)
5 ft
(1.5 m)
5 ft
(1.5 m)
5 ft
(1.5 m)
5 ft
(1.5 m)
7-8 ft
(2.1-2.4 m)
7-8 ft
(2.1-2.4 m)
7-8 ft
(2.1-2.4 m)
7-8 ft
(2.1-2.4 m)
VeniceOG.book Page 9 Monday, April 30, 2012 2:33 PM