Controls
and Indicators
Information
display
(535/525/235/135
series
II systems only)
The display provides operating and system status information.
Examples:
Source identification
Volume
Radio tuner
iPod
FM
P1
90.9 - WBUR90.9
Operating prompt
Remote
glow
button
Pressing the glow button
~?:-
on the rear of the remote
illuminates
the remote
buttons (and the display on 535/525/235/135 series
II
systems). The
light
turns
off automatically after several seconds
to
prolong battery life.
To
adjust the
illumination level
of the
display:
Note:
If
the currently selected source
is
AM or
FM,
switch to any other source before making this
adjustment. This prevents unintentionally deleting
a radio preset.
1.
Press and hold the
~9--
and
OK
buttons at the same
time for 5 seconds.
2.
Press the up
•
or down
T
navigation button
to
select Brightness or Contrast.
3.
Press the left
~
or right
...,_
navigation button
to
decrease or increase the illumination level.
4.
Press either the
OK
or
~~
to
return
to
normal
I
operation.
10-
English
,,/
-0-
/1'