ENGLISH - 37
APPENDIX A: INSTALLATION REFERENCE
Installing the rear speakers
UNIFY® setup guides you through the initial installation of your rear speakers during the
“Wireless speakers” step (see page 14).
If you are moving your system but have already completed setup, refer to the following
instructions in order to reassemble the rear portion of your home entertainment system.
Note: If you are unable to pair your rear speakers to the console, you can also connect
them directly to the system using a custom speaker cable (not provided).
For further instruction, see page 41.
What you need:
From box :
Jewel Cube® speakers (2) Rear speaker cables (2) AC-2 adapters (2)
From box : From box : From box :
Wireless receivers (2) Power cords (2) Screwdriver (1)
To Next Page
Loading...
