10
Setting Up Your Lifestyle
®
Stereo Amplifier
Mounting your Lifestyle
®
stereo amplifier
Your Lifestyle
®
stereo amplifier can be placed on a shelf or mounted on a wall (Figure 3).
• When placing the amplifier on a horizontal surface like a floor or shelf, the amplifier’s rubber
feet provide stability and prevent scratches.
• ONLY when mounting the amplifier on a wall, remove the rubber feet and use the existing
guide holes in the amplifier’s enclosure for mounting hardware. See Figure 4 for recom-
mended mounting methods and hardware.
• When mounting the amplifier vertically or horizontally on a wall, ALWAYS mount the
amplifier in an orientation shown in Figure 3.
Figure 3
Installation options
Figure 4
Mounting methods and
hardware
Shelf placement Vertically mounted on wall Horizontally mounted on wall
Connector
panel on
the left
Connector panel up
Wood wall
Wallboard
3
/32 in (2.25 mm)
(4) #10 x 1
1
/2 in (M5 x 36 mm)
1
/2 in (12 mm)
(4) #10 x 2
1
/2 in (M5 x 75 mm)
(4) #10 (M5)
To mark mounting hole locations, remove
the rubber feet, hold the amplifier in position,
and mark the wall through the clearance
holes in the housing.
¾ in (1.9 cm) minimum
3
/8 in (0.95 cm) minimum
To Next Page
Loading...
