48
English Dansk Epañol Dansk Epañol
English
System maintenance
Changing the remote control batteries is the only
regular maintenance required.
However, switches inside the remote battery case can
be changed. Similar changes may be required for any
additional remotes purchased for use in other rooms.
Note: For further information on switch settings refer to
“Changing remote control switch settings” on page 49.
Replacing the remote control batteries
Replace all four batteries when the remote control
stops operating or its range seems reduced. Alkaline
batteries are recommended.
1. Slide open the battery compartment on the back of
the remote (Figure 17).
2. Insert four AAA or IEC-LR3 1.5V batteries, or the
equivalent, as shown. Match the + and – symbols
on the batteries with the + and – markings inside
the compartment.
3. Slide the battery compartment cover back into
place.
Figure 17 Installing the remote control batteries
Battery
compartment
cover
Battery
compartment
AAA batteries (4)
REFERENCE
To Next Page
Loading...
