Bose MB210 - Recommended Amplifier Power; Recommended Signal Processing

English • 17
Installation Guide • MB210/MB210-WR
PRO.BOSE.COM
Installation
Recommended Amplifier Power
Selecting the proper amplifier size for a given loudspeaker requires analysis of the transducer long-term (or
RMS) power rating, dynamic range of the input-source material (crest factor), desired sound pressure levels,
and other factors. As a general guideline, to optimize MB210/MB210WR system performance, the following
amplifier configurations are recommended.
Loudspeaker Nominal Impedance Amp Power Rating
MB210 8 Ώ 500 W to 2000 W
MB210-WR 8 Ώ 500 W to 2000 W
Recommended Signal Processing
Digital signal processing (DSP) equipment is required for infrasonic protection, crossover, equalization, and
voltage limiting protection.
Recommended loudspeaker DSP presets are available in Bose ControlSpace Designer software and are
designed for use with Bose PowerMatch configurable professional amplifiers and ControlSpace ESP and EX
processor hardware (sold separately).