40
|
ENG
CONNECT BOSE PRODUCTS
CONNECT A BOSE BASS MODULE
You can connect your Bose Bass Module to the amplifier using a 3.5 mm stereo audio
cable (not provided).
NOTES:
• The 3.5 mm audio cable must be stereo and shielded.
• If you don’t have a 3.5 mm audio cable, visit Bose.com/BM500Bose.com/BM500 or
Bose.com/BM700Bose.com/BM700 to purchase a 15 ft (4.5 m) cable. You can also purchase this part
at your local electronics store.
1. On the amplifier, connect one end of a 3.5 mm audio cable to the BASS port.
2. Connect the other end of the cable to the BASS IN port on the bass module.
Bose Bass Module 500
Bose Bass Module 700
NOTE: For more information about your bass module, refer to your bass module
owner’s guide. Visit:
Bose Bass Module 700: Bose.com/BM700Bose.com/BM700
Bose Bass Module 500: Bose.com/BM500Bose.com/BM500
To Next Page
Loading...
