16
|
ENG
CONNECT SPEAKERS
Before connecting your speakers, place your speakers in their permanent location and
make sure the amplifier is unplugged from an AC (mains) power outlet.
Speaker wires consist of two insulated wires:
• The marked wire (stripes, ribbing, or color) connects to the positive (+) terminal.
• The plain wire connects to the negative (–) terminal.
1. Remove terminal block A from the SPEAKERS OUT port.
L L R R
L L R R
2. Connect the speaker wires to terminal block A.
a. Insert the left speaker’s marked wire into the L + positive terminal and the
plain wire into the L - negative terminal.
b. Insert the right speaker’s marked wire into the R + positive terminal and the
plain wire into the R - negative terminal.
L L R R
To Next Page
Loading...
