Why won't my Bluetooth device connect to my Bose S1 Pro?
If your device needs a passcode, verify you've entered it correctly. Ensure Bluetooth is enabled on your device and that it's within range of the speaker. Try turning off other nearby Bluetooth devices. You can also clear the speaker's memory by holding the Bluetooth button for ten seconds to pair a new device. Additionally, try turning the power off and on, then re-pairing your device.
What to do if my Bose S1 Pro Speakers are not charging?
Ensure the power switch is set to 'On' or 'Quick Charge' and avoid using the speaker while it's charging. Try charging with the power switch set to 'On' instead of 'Quick Charge'. Move the speaker to a cooler area. Let the speaker sit in Standby for several hours before attempting to charge it again. Unplug the speaker, remove the battery, wait for it to cool, and then reinsert it.
What to do if my Bose Speakers have no sound?
Check that your instrument is properly connected to the signal input and that the volume controls are turned up on both your source and the S1 Pro. Also, ensure the Signal/Clip indicator is lit. To further isolate the problem, plug your instrument into a different amplifier to confirm that the source is working correctly.
How to fix distorted sound from my Bose S1 Pro instrument or audio source?
Reduce the volume on your audio source. If the volume can't be adjusted, consider using 'input pads' available from instrument retailers. Alternatively, try using a different source or instrument to see if the distortion persists.
What causes excessive hum when daisy-chaining multiple Bose Speakers?
When connecting multiple units, ensure you are using a 1"/4 TRS cable and not a 1"/4 TS (guitar) cable.
What to do if my Bose S1 Pro Speakers have a slight hum or buzz?
Test the AC outlet that the S1 Pro is plugged into using an AC outlet tester to check for reversed or open (hot, neutral, and/or ground) contacts. If you're using an extension cord, try plugging the S1 Pro directly into the outlet.
What to do if my Bose S1 Pro Speakers microphone is encountering feedback?
Lower the volume and reposition the microphone so it doesn't point directly at the loudspeaker. Try using a different microphone or adjusting the positions of the loudspeaker and vocalist on stage. Increase the distance between the loudspeaker and the microphone. If you're using a vocal effects processor, ensure it's not causing the feedback.
Why do my Bose S1 Pro Speakers have no power?
Check if the AC outlet is providing power by testing it with a lamp or an AC outlet tester. The battery may be in protection mode or discharged, so connect the speaker to AC power.
Why is the Power LED on my Bose S1 Pro red?
If the power LED is flashing red, it indicates that the battery has less than 10% charge. If the LED is solid red, contact Product and Technical Support at (877) 335-2673.
General| Product color | Black |
|---|---|
| Battery voltage | - V |
| Battery capacity | - mAh |
| Battery life (max) | 11 h |
| Number of batteries included | 1 pc(s) |
Details the key features and advantages of the Bose S1 Pro system, highlighting portability and versatility.
Lists the items included in the Bose S1 Pro system carton, such as the speaker and power cord.
Provides information on additional accessories available for purchase to enhance the Bose S1 Pro system.
Describes positioning the S1 Pro on a surface to project sound clearly and evenly throughout the audience.
Explains tilting the S1 Pro onto its back edge for performances where the audience is close by.
Details using the S1 Pro as a personal floor monitor, placed horizontally towards the performer.
Covers mounting the S1 Pro on speaker stands for general-purpose sound reinforcement.
Highlights features of the Bose Connect app, including easy device connection and Party/Stereo modes.
Details the S1 Pro control panel, showing connectors, controls, and indicators for operation.
Guides on connecting power, audio sources via channels 1-3, and Bluetooth pairing for the S1 Pro.
Instructions for charging the battery, checking its life, and using the S1 Pro with a speaker stand.
Example of using S1 Pro on a tabletop for presentations or parties, with microphone and Bluetooth audio.
Using S1 Pro in Tilt-Back mode for live performances, with Bluetooth backing tracks and microphone.
Using S1 Pro as a floor monitor, facing the performer for personal monitoring or sending mix to PA.
Using S1 Pro on a speaker stand for PA use, with a microphone and Bluetooth streaming.
Connecting two S1 Pros with a mixer for PA use or for stereo audio output.
Linking two S1 Pro systems together in mono using a TRS 1/4" cable for amplified sound.
Step-by-step instructions for safely removing and installing the S1 Pro battery pack.
Guidelines for cleaning the S1 Pro enclosure using only soft, dry materials and avoiding chemicals.
Solutions for common problems such as no power, no sound, or Bluetooth connectivity issues.
Technical specifications for the Bose S1 Pro system, including dimensions, weight, and battery performance.
To Next Page
