16 • English S1 Pro System • Owner's Guide
Care & Maintenance
Care & Maintenance
Replacing the Battery
1. Switch the power to Standby ( ) and disconnect the S1 Pro from the power source.
2. Unscrew the two screws and remove the bottom plate.
3. Remove the battery using the pull tabs.
4. Insert the new battery, ensuring the connector pins line up appropriately.
5. Replace the bottom plate and secure it with the two screws that were removed in Step 2.
6. Plug the S1 Pro into a power source.
7. Power on the system by turning the power switch to On ().
Note: Your replacement S1 Battery Pack will remain in Sleep mode until your S1 Pro is powered on.
Note: To purchase a spare S1 Battery Pack, please visit www.Bose.com.
To Next Page
Loading...
