System Setup
English - 17
Using alternate connections
You may need to use an alternate connection:
• If your TV does not have any audio output connections or does not deliver the
audio to the Solo 15/10 system. See “Connecting a cable/satellite box to the sys-
tem” or “Connecting a TV headphones output to the system” on pages 17-18.
• If you do not get sound from a DVD player that is connected to your TV.
See “Connecting multiple devices to the system” on page 19.
Connecting a cable/satellite box to the system
You can connect a cable/satellite box to the Solo 15/10 system. Only one cable is
needed.
Caution: If using an optical cable, refer to page 12 for important instructions.
1. On the back of your cable/satellite box, locate the Audio Out connector panel
and note which type of audio outputs your cable/satellite box has.
Audio OUT
Cable/satellite
box
Audio IN Solo 15/10 system
Remove caps
2. Choose the appropriate audio cable for your cable/satellite box.
3. Connect the audio cable from your cable/satellite box’s Audio Out connector
panel to the Solo system.
To Next Page
Loading...
