System Setup
14 - English
Step 7: Check your TV settings
To enjoy the full benefit of hearing TV audio through the Solo TV sound system, the
internal speakers in your TV should be turned off. Also, you need to make sure that
some audio settings do not inhibit the audio output signal.
Note: Check the user manual for your TV for help on using the TV menus and
changing any TV settings. Manufacturers usually make user manuals
available on their web sites.
A. Turn on your TV.
B. Go to the TV menu and select Audio, Sound, or Speaker Settings.
C. Look for the menu item that allows you to turn off the TV speakers. This
menu item may be called Speakers On/Off or something closely related.
If there is no setting for turning the TV speakers off, adjust the TV volume to its
lowest setting.
D. If you decided to use either an optical or coaxial digital audio output, look for a
menu item in the Audio Settings that may affect digital audio output. You may
have to select the digital output you want to use.
E. Look for any setting that selects the type of audio output, such as Stereo or
5.1 Channel Audio output. You may need to select such a setting in order to
enable the audio output.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
