12 - ENGLISH
USING THE HEADSET
Acoustic Noise Cancelling
™
noise reduction
Use the power switch on the control module to turn noise reduction on and o.
ON
OFF
Note: When the power is o, the headset still provides audio and communications. To
conserve battery life, turn the switch o when the headset is not in use.
Power indicator
The power indicator is located next to the power switch.
Power indicator
Color Indicates
Green flashing Sucient battery life
Slow red flashing 10 hours or less remaining
Fast red flashing 2.5 hours or less remaining
Note: When the headset is powered on, the power indicator glows red for three
seconds while the system checks battery status. After three seconds, the
indicator shows the actual battery status.
To Next Page
Loading...
Need help?
General
