15
Tab 6, 14English Tab 2, 10 Tab 3, 11 Tab 4, 12 Tab 5, 13 Tab 8, 16Tab 7, 15
Manually linking the SoundLink
TM
adapter and USB key
You may be using a replacement SoundLink
TM
USB key or SoundLink
TM
adapter or troubleshoot-
ing the wireless connection. In either case, you should link the USB key and adapter manually.
1. Using the provided SoundLink
TM
remote control, press the SoundLink/CD button to select the
computer as the music source.
2. Press and hold the Presets 5 button on the remote control until DISCOVERABLE is
displayed and flashing on the Acoustic Wave
®
system display.
3. With your computer turned on, lift the antenna on the
SoundLink
TM
USB key to the vertical position and plug the
key into a USB port on your computer.
4. Press and hold the button on the USB key for more than 3
seconds until the light begins to flash. When the USB
power light changes from flashing to solid and the
Acoustic Wave
®
system emits a beep, linking is complete.
Customer service
For additional help in solving problems, see notes about the product at: Owners.Bose.com.
To contact Bose
®
Customer Service for help, or to replace a misplaced remote control, see the
phone numbers on the inside back cover of your Acoustic Wave
®
music system guide.
To Next Page
Loading...
