4
Tab 3, 11Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 EnglishTab2, 10
Preparing your Acoustic Wave
®
music system for wireless
The SoundLink
TM
adapter connects directly to your Acoustic Wave
®
system.
1. Plug the SoundLink
TM
adapter cable (with the
words Bose link facing up) into the Bose link
connector on the rear of the system.
2. Place the adapter in a convenient location. It does
not need to be within view.
If the adapter is on the right of the system (as you
face it), be sure the two are at least 2 in. (5 cm)
apart to eliminate any interference with FM or
AM reception.
To Next Page
Loading...
