A factory reset clears the speaker's language setting and its paired mobile device memory,
returning the speaker to original factory settings. Once reset, turn the speaker on and try again to
pair the device.
Try pairing another device. If the other device works, there may be an issue with the first device
Pairing with a Bluetooth® device
Applies to:
SoundLink Micro Bluetooth® speaker
To pair a Bluetooth® device:
With your speaker powered on, press and hold the Bluetooth® button until you hear "Ready to
connect" and the Bluetooth® indicator blinks blue
On the device you want to pair, turn on Bluetooth. This is typically found in the device's settings
menu
Select your speaker from the device list
Once paired, you hear "Connected to <mobile device name>", and the Bluetooth indicator glows
solid white
You can store up to eight paired mobile devices in the speaker pairing list.
To pair an additional mobile device:
Press and hold the Bluetooth® button until the Bluetooth® indicator blinks Blue and you hear
"Ready to pair another device"
Pair your device to the speaker using the steps above
You can store up to eight paired mobile devices in the speaker pairing list, and your speaker can
be actively connected to two mobile devices at a time.
However, you can only play audio from one device at a time.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
