A factory reset clears the speaker's language setting and its paired mobile device
memory, returning the speaker to original factory settings. Once reset, turn the
speaker on and try again to pair the device.
Try pairing another device. If the other device works, there may be an issue with
the first device
Difficulty using Party and Stereo modes
Applies to:
• SoundLink Micro Bluetooth® speaker
Please try the following steps if you are having trouble using the Party and Stereo
feature:
Use the Connect app to pair speakers
Party and Stereo modes can be enabled either by using the Bose® Connect app or
manual pairing using the speaker buttons. However, the Connect app pairing
method is strongly recommended for two reasons:
• The procedure on the Connect app is designed to be user friendly
• The Connect app allows any combination of compatible speakers to enter
Party or Stereo modes. (For example, a Revolve and a Revolve+ can be
paired together.) The manual method of using the speaker buttons only
allows you to pair two of the same speaker model
Make sure only one speaker is actively connected to the mobile device.
Stereo and Party mode will not work if both speakers are connected to the mobile
device
Check software versions
The software needs to be up to date, as do both speakers, when using Party and
Stereo modes. If there is a mismatch of two speakers running on different firmware
versions, it can result in difficulty pairing
Try pausing audio when engaging Party or Stereo modes
Pause audio streaming to all speakers before turning on Party or Stereo mode
To Next Page
Loading...
Need help?
General
Weight and Dimensions
