Bose SoundLink Color - Using the AUX Input

Operation
English - 13
Connecting an AUX device:
You can use your Bose
®
SoundLink
®
Color speaker with any device that features
headphone or audio output, such as a portable digital music player. This feature
requires using a stereo audio cable with a 3.5 mm plug on each end to connect the
audio output of your device to the AUX input on the speaker. This type of cable is
available for purchase at electronics stores
To use the AUX connector:
1. Plug the cable from the audio device into the AUX IN connector on the back of
the speaker.
2. Turn on the speaker.
3. Press
to select the AUX source.
4. Adjust the volume on the connected device to near maximum, then use the
speaker volume buttons to adjust the volume level.