15
|
ENG
POWER
CONNECT TO POWER
Your speaker ships with a partial charge. Before using your speaker for the first time,
connect it to an AC (mains) outlet. Your speaker does not need to be fully charged,
but it does require the initial connection to activate the battery.
1. Plug the small end of the USB cable into the micro-B USB connector on
your speaker.
2. Plug the other end into the USB power supply.
3. Plug the USB power supply into an AC (mains) outlet.
NOTE: If necessary, plug the AC adapter for your region into the AC (mains) outlet.
The battery light 6 blinks amber, and your speaker emits a tone. When fully
charged, 6 glows green.
POWER ON/OFF YOUR SPEAKER
On the button pad, press the Power button I.
• The first time you power on your speaker, the Bluetooth light glows blue, and you
hear a voice prompt to select a language (see page 20).
• If you have already powered on your speaker and paired at least one mobile device,
the Bluetooth light blinks white and connects to the last two paired mobile devices.
You hear “Battery <number> percent. Connected to <mobile device name>.” The
Bluetooth light glows solid white.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
