Bose SOUNDLINK REVOLVE II User Manual

PAIR BOSE PRODUCTS
31
|
ENG
Stereo mode
1. Configure your speakers for Party mode (see page 30).
2. On a speaker, press the Bluetooth button l and H simultaneously.
3. Release the buttons when you hear “Stereo mode.” You hear “Left” from the left
speaker and “Right” from the right speaker.
Stereo mode is enabled. You are now able to play audio in stereo using your
mobile device.
4. For an optimal experience, position your speakers:
• In the same room or outdoor area
• Within 10 feet of each other, free from obstructions
• So that your distance to each speaker is equal
NOTE: Performance may vary based on mobile device, distance and
environmental factors.
Switch between Party mode and Stereo mode
On either speaker, press l and H simultaneously.
Disable Party mode or Stereo mode
Do one of the following on either speaker:
• Press and hold l until you hear “Bose speakers unlinked.”
• Press and hold the Multi-function button V and H simultaneously until you hear
“Bose speakers unlinked.”
• Press the Power button I to power o the speaker.

Bose SOUNDLINK REVOLVE II Specifications

General

Number of speakers	1
Number of passive radiators	2
Recommended usage	Mobile phone / Smartphone
Remotely operated	Yes
Virtual assistant	Google Assistant & Apple Siri
Card reader integrated	-
Battery type	Built-in battery
Battery life (max)	13 h
Power consumption (standby)	2 W
RMS rated power	- W
Bluetooth range	9 m
USB connector type	Micro-USB B
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Cables included	Micro-USB
Product type	Stereo portable speaker
Product color	Black
Product design	Cylinder
Volume control	Buttons
Protection features	Bump resistant, Dust resistant, Water resistant

Weight and Dimensions

Width	82 mm
Height	152 mm
Weight	660 g