REGULATORY INFORMATION
4
|
ENG
The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is
in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation
(EU) No. 801/2013.
Required Power State Information
Power Modes
Standby Networked Standby
Power consumption in specified power mode, at
230V/50Hz input
≤
0.5 W Bluetooth®
≤ 2.0 W
Time after which equipment is automatically switched
into mode
≤
20 minutes
≤
5 minutes
Power consumption in networked standby if all wired
network ports are connected and all wireless network
ports are activated, at 230V/50Hz input
N/A
≤
2.0 W
Network port deactivation/activation procedures.
Deactivating all networks will enable standby mode.
Bluetooth: Deactivate by clearing the pairing list by pressing and
holding the Bluetooth button for 10 seconds. Activate by pairing with
a Bluetooth source.
To Next Page
Loading...
