Try connecting the device with a different Aux cable
Try connecting another source to determine if the issue is specific to a particular device
Reset the speaker by turning it on and holding the Power button for ten seconds. Note: A reset
clears paired mobile devices and language settings from the speaker and returns it to original
factory settings.
Speaker will not turn on when using battery
Applies to:
SoundLink® Color Bluetooth® speaker II
SoundLink Revolve Bluetooth® speaker
SoundLink Revolve+ Bluetooth® speaker
SoundLink Micro Bluetooth® speaker
Connect the speaker with its charging cable to a USB charger or a powered computer USB port.
You may need to do this for the following reasons:
The battery may not be sufficiently charged. The battery must have sufficient charge to power up
the speaker
The speaker has been disconnected from power and unused for 14 days. When this happens, it
goes into battery protection mode. Brand new speakers are typically in this mode when they're
first removed from the box
The speaker is unplugged and unused for more than three days with a remaining charge of less
than 10%. When this happens, it also goes into battery protection mode
If your speaker still does not turn on after connecting it to power, see Speaker will not turn on
when connected to AC power
Poor sound quality from an aux device
Applies to:
SoundLink® Colour Bluetooth® speaker
SoundLink® Color Bluetooth® speaker II
SoundLink Revolve Bluetooth® speaker
SoundLink Revolve+ Bluetooth® speaker
Try the following to resolve your issue:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
