Bose SoundTouch SA-5 Quick Start Guide

ENGLISH
Remove terminal block A.
Each terminal block accepts one pair
of speakers.
Connect and secure the speaker wires
to terminal block A.
1. Insert the left speaker’s marked wire into the
+ L positive terminal and the plain wire into
the
L – negative terminal.
2. Insert the right speaker’s marked wire into the
+ R positive terminal and the plain wire into
the
R – negative terminal.
Reinsert terminal block A.
To connect a second pair of speakers,
repeat steps 1-3 using terminal block B.
Note: Refer to your speaker owner’s
guide for instructions on connecting
the other end of the speaker wires to
the speakers. You can connect up to two
pairs of unpowered speakers.

Bose SoundTouch SA-5 Specifications

General

Amplifier class	-
Audio output channels	- channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	- %
AC (power) in	Yes
USB 2.0 ports quantity	1
Purpose	Home
Product color	Black
Connectivity technology	Wired & Wireless

Weight and Dimensions

Depth	300 mm
Width	184 mm
Height	77 mm
Weight	1500 g