Bose SoundTouch Start Here

Program the remote control
Refer to the Universal Remote Control Setup Guide (provided)
for instructions on programming and using the remote control.
ENGLISH
No audio?
Try these troubleshooting steps:
• Make sure the soundbar’s HDMI cable is inserted into an
HDMI ARC or Audio Return Channel connector on your TV,
not a standard HDMI connector.
• If the soundbar is connected to your TV’s HDMI ARC
connector, make sure that Consumer Electronics Control
(CEC) is enabled in your TV system menu. Your TV may
refer to CEC by a different name. Refer to your TV
owner’s guide.
Note: CEC is fully enabled on the soundbar by default.
• Connect to the soundbar using both the HDMI cable
(inserted into your TV’s HDMI ARC connector) and the
optical cable (see step 2).
For complete troubleshooting information, refer to the online
owner’s guides:
global.Bose.com/Support/SSS

Bose SoundTouch Specifications

General

Number of drivers	-
Number of speakers	1
Audio output channels	2.0 channels
Recommended usage	Universal
Remotely operated	Yes
Card reader integrated	No
Product type	Stereo portable speaker
Product color	Black
Product design	Other
Volume control	Digital
Impedance	- Ω
Frequency range	- Hz
RMS rated power	- W
Display	OLED
Depth (imperial)	2.5 \
Width (imperial)	9.8 \
Height (imperial)	5.8 \
Cables included	AC
Quantity per pack	1 pc(s)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wireless
Power source type	Battery

Weight and Dimensions

Depth	64 mm
Width	249 mm
Height	147 mm
Weight	1448 g