English - 9
Setting Up Your Wave® SoundTouch™ Music System
Adding the system to your Wi-Fi
®
network
Before you can use SoundTouch
™
you must install the
SoundTouch™ app on a computer that is on your home network.
Next, you will use the app to connect the Wave
®
SoundTouch™
music system to the network. The app guides
you through the setup process.
Make sure you follow the instructions on your computer.
Note: If you have already set up SoundTouch™ for another
system, just launch the app and click
EXPLORE > SETTINGS > Systems > ADD SYSTEM
to add another system.
Installing the SoundTouch™ app
1. From a computer that is on your Wi-Fi network, open a
browser and go to:
http://www.Bose.com/soundtouch_app
Tip: If you want SoundTouch
™
to play your iTunes
®
or
Windows Media
®
Player music library, use the
computer where your music library is stored.
2. Download and install the SoundTouch
™
app on your computer.
You are now ready to connect the system to your network.
Note: Do not connect any cables to the system until the app
instructs you to connect the cables.
Connecting the system to your home
Wi-Fi network
1. Make sure you have set up your system by following the steps
in "System setup" on page 8.
2. Launch the app by double-clicking the SoundTouch
™
icon.
The first time the app launches, it guides you through setting
up the system on your Wi-Fi network.
The app instructs you to connect the system.
3. When prompted by the app, plug the small end of the USB
cable into the SETUP A connector on the system.
SETUP A
USB cable
(provided)
4. Plug the other end of the USB cable into a USB port on your
computer.
The app detects the system and instructs you to enter your
network credentials.
5. Follow the instructions on your computer to complete setup,
including creating a SoundTouch
™
account, locating your
music library, signing in to music services, exploring and
personalizing your presets.
To Next Page
Loading...
Need help?
General
