Boss AW-2 - Page 5

SETTING MEMO
■ SPECIFICATIONS
Controls : Pedal Switch, Modulation Rate, Modulation Depth, Manual, Sens
Indicator : Check Indicator (serves also as battery check indicator)
Jacks : Input, Output, AC Adaptor
Input Impedance : 1 Mfl ( Effect Off)
Output Impedance : 1 kO
Recommended Load Impedance : lOkfi or greater
Residual Noise : —80dBm or less(IHF-A, Typ.)
Power Supply : DC9V ; Dry Battery (9V type), AC Adaptor (PSA-120, 220 or 240 : option)
Current Draw : i5mA(DC9V)
Dimensions : 70(W) X125(D) X55(H)mm / 2-3/4"X4-15/16” X2-3/16"
Weight : 420g / 1.0 lbs (including battery)
Accessories : Instructions, Dry Battery S-006P/9V(6F22/9V)
Options : AC Adaptor ; PSA-120, PSA-220, PSA-240
Dry Battery ; S-006P/9V(6F22/9V), 6AM6/9V (alkaline)
*The specifications for this product are subject to change without prior notice.
Copylight C 1991 BOSS CORPORATION
All rights reserved. No part of this publication may be
reproduced in any form without the written permission
of BOSS CORPORATION.
Printed in Taiwan 91 9 D3
Products of Roland