Boss AC-2 User Manual

1
Owner's Manual
DCAC
AC & BATTERY
POWERED
FET

Boss AC-2 Specifications

General

Type	Acoustic Simulator
Input Impedance	1 MΩ
Output Impedance	1 kΩ
Power Supply	DC 9V
Connectors	AC Adaptor
Inputs	1 x 1/4"
Outputs	1 x 1/4"
Battery Type	9V
Dimensions	73 mm (W) x 129 mm (D) x 59 mm (H)

Summary

Important Notes for Safe Operation

Power Supply Considerations

Information on powering the unit safely and avoiding noise.

BOSS AC-2 Panel Descriptions

AC Adaptor Jack

INPUT Jack

Operating the BOSS AC-2 Unit

Initial Connections and Settings

Steps for making connections and setting initial knob positions.

Effect Activation and Mode Selection

Step-by-Step Operation Guide

Making Connections for the AC-2

General Connection Precautions

Important safety advice before connecting cables and power.

Connecting to a Single Amplifier

Diagram and instructions for connecting the unit to one amp.

Dual Amplifier Setup for Sound Routing

Connecting for Separate Sound Destinations

Diagram showing how to route direct and effect sounds to two amps.

Effect ON: Output Routing

Effect OFF: Output Routing

Changing the Battery

Battery Replacement Procedure

Step-by-step instructions for replacing the unit's battery.

Using the Unit Safely

Understanding Safety Notices and Symbols

Explanation of WARNING, CAUTION notices and safety symbols.

General Safety Guidelines

Covers prohibitions, environment, stability, and basic usage rules.

Power, Hearing, and Object Safety

Safety for AC adaptor, power cord, volume levels, and object entry.

Operational and Environmental Safety

Covers servicing, child safety, cord load, and foreign use.

Battery and Electrical Safety

Precautions for battery handling, ventilation, and plug safety.

Handling, Storage, and Disposal

Advice on cable management, cleaning, moving, lightning, and battery disposal.