Boss DD-200 User Manual

Owner’s Manual
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY” and the Owner’s
Manual (p. 17)). After reading, keep the document(s) where it will be available for immediate reference.
© 2019 Roland Corporation

Boss DD-200 Specifications

General

Effect Type	Digital Delay
Maximum Delay Time	10 seconds
Bypass	Buffered Bypass
Internal Processing	32-bit floating point
Delay Time	1 ms to 10, 000 ms
Input Impedance	1 M ohm
Output Impedance	1 k ohm
Tap Tempo	Yes
Delay Modes	Standard, Analog, Tape, Drum, Shimmer, Tera Echo, Pad Echo
Connectivity	2 x 1/4" Input, 2 x 1/4" Output, 1 x 1/4" Control, 1 x USB
Power Supply	AC adaptor
Dimensions	101 mm (W) x 138 mm (D) x 63 mm (H)
AD/DA Conversion	24 bits
Power	9V DC
Delay Types	STANDARD, ANALOG, TAPE, DRUM, SHIMMER, TERA ECHO, PAD ECHO
Inputs	2 x 1/4" (L/Mono, R)
Outputs	2 x 1/4" (L/Mono, R)
USB	Yes
Weight	650 g