Boss DD-200 - Menu Parameter List and Functions

Overall Settings (Menu)
11
Menu Parameter List
Parameter
Explanation
Cry
(CARRYOVER)
Species whether the eect sound is
carried-over (on) or not carried-over
(oFF) when you switch sounds or turn
o the delay.
tHd
(TEMPO HOLD)
Species whether the tempo (BPM) is held
(on) or changed (oFF) when you switch
sounds.
SWF
(ON/OFF FUNCTION)
MFC
(MEMORY FUNCTION)
C1F
(CTL1 FUNCTION)
C2F
(CTL2 FUNCTION)
Specify the functions of the [ON/OFF]
switch, [MEMORY/TAP] switch, and
footswitches connected to the CTL 1, 2/
EXP jack.
* The functions that can be assigned dier
depending on the switch.
oFF: No operation.
SW
(ON/OFF SWITCH): Turns the eect on/o.
MoM
(MOMENT): Outputs the delay sound
only while held down.
Fad
(FADE): Makes the delay sound fade-
in/out.
Parameter
Explanation
SWF
(ON/OFF FUNCTION)
MFC
(MEMORY FUNCTION)
C1F
(CTL1 FUNCTION)
C2F
(CTL2 FUNCTION)
MAN (MANUAL): Selects manual.
M-1–4
(MEMORY1–4): Selects memory 1–4.
MUP, Mdn
(MEMORY UP, DOWN): Selects
memories according to MEMORY EXTENT
(p. 12). Long-press the switch to select
tap mode (the indicator blinks at the
tempo).
tAP
(TAP TEMPO): Tap-enters the tempo
(tap mode).
HLd
(HOLD): Repeats the delay sound while
held down (hold mode).
WAP
(WARP): Simultaneously controls the
feedback amount and volume of the delay
sound, letting you produce a fantasy-like
delay (warp mode).
tSt
(TWIST): Produces an aggressive
rotating eect (twist mode).
rL2
(ROLL 1/2), rL4 (ROLL 1/4), rL8 (ROLL 1/8):
Sets the delay time to 1/2–1/8 (roll mode).