Boss DD-200 - Page 12

Overall Settings (Menu)
12
Parameter
Explanation
SWF
(ON/OFF FUNCTION)
MFC
(MEMORY FUNCTION)
C1F
(CTL1 FUNCTION)
C2F
(CTL2 FUNCTION)
LPS (LOOP ON/OFF): Turns the looper on/o.
LPC
(LOOPER CONTROL): Controls the looper.
Tap: Switches the looper between play/overdub/stop.
Double-tap: Stops the looper.
Long-press while stopped: Clears the phrase.
LPP (LOOPER PLAY/DUB/STOP): Switches the
looper between play/overdub/stop
LSt
(LOOPER STOP): Stops the looper. Hold
for two seconds or longer to clear the
phrase.
EPF
(EXPRESSION FUNCTION)
Species the function of an expression
pedal connected to the CTL 1, 2/EXP jack.
oFF: No operation.
tiM
(TIME/BPM): The same operation as the
[TIME] knob.
Fdb
(FEEDBACK): The same operation as the
[FEEDBACK] knob.
Elv
(E.LEVEL): The same operation as the
[E.LEVEL] knob.
Mod
(MOD DEPTH): The same operation as
the [MOD DEPTH] knob.
PrM
(PARAM): The same operation as the
[PARAM] knob.
iLv
(INPUT LEVEL): Adjusts the input level.
Parameter
Explanation
EPn
(EXPRESSION MIN)
EPM
(EXPRESSION MAX)
Species the variable range of the
parameter controlled by EXPRESSION
FUNCTION. The variable range diers
depending on the parameter.
SWP
(ON/OFF PREFERENCE)
MEP
(MEMORY PREFERENCE)
C1P (CTL1 PREFERENCE)
C2P (CTL2 PREFERENCE)
EPP
(EXPRESSION PREFERENCE)
MEM (MEM): The setting in memory is used
SYS
(SYS): The controller's function is xed
regardless of memory
Out
(OUTPUT MODE)
Selects how output occurs.
nOr
(NORMAL): Output is stereo if plugs are
inserted in the OUTPUT A/B jacks; if not,
output is mono from the OUTPUT A jack.
d/E
(DIRECT/EFFECT): The direct sound is
output from the OUTPUT A jack, and the
eect sound is output from the OUTPUT
B jack.
dMt
(DIRECT MUTE): The direct sound is not
output.
EtF
(MEMORY EXTENT FROM)
EtT
(MEMORY EXTENT TO)
Specify the memory switching range
(MEMORY EXTENT FROM–TO).
Man
(MANUAL), 1–4