Boss Digital Delay DD-6 - Specialized Delays; Reverse; HOLD (5.2 S); Warp

8
Panel Description
● Specialized Delays
* When inputting the tempo, refer to “Using the
Tempo Delay” (p. 12).
* When using long delay or other output, refer to
“Setting the Output Method” (p. 16).
REVERSE:
This produces an effect where the sound
is played back in reverse.
You can get two different effects, “direct
sound + effect sound,” or “effect sound
only,” depending on the position of the
E.LEVEL knob. When the E.LEVEL knob
is turned up, so it’s near MAX, the unit
switches to “effect sound only.”
HOLD (5.2 s):
Up to 5.2 seconds of performance content
is recorded, then played back repeatedly.
* For details, refer to “Using the HOLD
(Overdubbing) Function” (p. 14).
WARP:
As the pedal is depressed, the amount of
feedback and the effect level increase
above the levels determined by the knob
positions.
* For details, refer to “Using the WARP Function”
(p. 15).
MODE
Switch
Delay
Time
Tempo
Setting
DD-6_e.book 8 ページ ２００６年７月２５日 火曜日 午後３時３７分