Boss DR-01s - Advanced Use (Settings) - Volume & Reverb; Adjusting the Volume of Each Instrument

13
Advanced Use (Settings)
Adjusting the Volume of Each
Instrument
When multiple instruments are playing the
rhythm, you can adjust the volume of each
instrument.
1. Hold down the instrument button
whose volume you want to change,
and use the VOLUME [I] [H]
buttons.
u50
Instrument Volume
The volume of the
instrument is shown.
Adjust the volume of the instrument to set
its balance with the other instruments.
2. Release the instrument button.
MEMO
The volume of sound eects (surf,
birdsong, rain) does not change
immediately if you adjust it while
rhythm is playing. The volume change
is applied when you stop the rhythm.
Adjusting the Reverb Level
You can apply reverb (an eect simulating the
reverberation of a hall) to the rhythm.
You can adjust the amount of reverb.
1. Hold down the [EXIT] button, and
use the VOLUME [I] [H] buttons.
r50
Reverb Level
The amount of reverb
is shown.
Adjust the reverb level.
Indication Explanation
r.00
Reverb is not applied.
r.10
:
100
Reverb is applied.
2. Release the [EXIT] button.