Boss DR-01s - Advanced Use (Settings) - Pedal Assignments; Assigning a function to CTL2; Assigning a Percussion Sound

16
Advanced Use (Settings)
Assigning a function to CTL2
1. After step 1 of “Assigning
Functions to Pedals” (p. 15), press
the [EXIT] button.
ct2
CTL2 function assign
screen
Assigns a function to
CTL2.
Now you can assign a function to CTL2
(pedal A).
To select the pedal whose function you
want to assign, press the [EXIT] button to
alternate between the two pedals.
Assigning a Percussion Sound
1. After step 1 of “Assigning
Functions to Pedals” (p. 15), press
the [COUNT IN] button.
The VARIATION [I] [H] buttons are lit. Now
you can assign a percussion sound to the
pedal.
2. Use the VARIATION [I] [H] buttons
to select the percussion sound that
you want to play using CTL1.
Each time you press a VARIATION [I] [H]
button, a percussion sound is heard.
The sound that you select is assigned to
CTL1 (pedal B).
3. Press the [L] button.
Power-o the DR-01s.
The next time you turn on the power, you
can use the percussion sound that you
assigned to the pedal.
Percussion sounds that can be
assigned to a pedal
Indication Percussion sound
n.01
Shaker
n.02
Maracas
n.03
Sleighbells
n.04
Whistle 1
n.05
Whistle 2
n.06
Tambourine
n.07
Tambourine roll
n.08
Pandeiro 1
n.09
Pandeiro 2
n.10
Claves
n.11
Cowbell
n.12
Triangle 1
n.13
Triangle 2
n.14
Guiro 1
n.15
Guiro 2
n.16
Bongo Low
n.17
Bongo Slap
n.18
Clap
n.19
Finger snap
n.20
Flamenco clap
n.21
Conga open
n.22
Conga slap
n.23
Cajon foot
n.24
Cajon foot + Splash cymbal
n.25
Cajon slap
n.26
Splash cymbal
n.27
Drums solid kick
n.28
Drums solid kick + Thin crash
n.29
Drums studio kick
n.30
Drums studio kick + Thin crash
n.31
Drums hybrid kick
n.32
Drums stomp
n.33
Drums piccolo snare
n.34
Drums tight snare
n.35
Drums cross stick
n.36
Drums hi-hat close
n.37
Drums hi-hat pedal
n.38
Drums thin crash
n.39
Windchime
n.40
Gong
n.41
Vibraslap
n.42
Thunder
n.43
Wind
n.44
Bird