19
Advanced Use (Settings)
Power-Conservation Setting
(Auto O)
The DR-01s automatically powers-o if a
specied time elapses without it being played
or operated (Auto O function).
You can prevent the power from automatically
turning o, such as when using it during a live
performance.
1. With the DR-01s powered-o, hold
down the TEMPO [H] button and
press the [L] button.
The DR-01s powers-on in a special mode
that lets you change the Auto O setting.
2. Press VARIATION [I] [H] buttons.
Specify the time after which the power
automatically turns o if the DR-01s has not
been played or operated.
Indication Explanation
off
The Auto O function is disabled
(the power does not turn o
automatically).
1H
The power turns o after one
hour.
2H
The power turns o after two
hours.
3h
The power turns o after three
hours.
4h
The power turns o after four
hours.
Restoring the Factory Settings
(Factory Reset)
Here’s how to restore all settings stored in the
DR-01s to their factory-set condition.
NOTE
When you execute the factory reset
operation, all data saved in the
DR-01s lost.
Make a note of any important settings
that you want to keep. (Use the
“Sound Memo” provided at the end
of this manual.)
1. With the DR-01s powered-o, hold
down the [FAVORITE] button and
press the [L] button.
fr
Factory Reset
2. Press the [FAVORITE] button.
The [FAVORITE] button blinks.
If you decide not to execute the factory
reset, press the [EXIT] button.
3. If you are sure that you want to
restore the DR-01s to its factory-set
state, press the [FAVORITE] button
once again.
The display shows “oFF.”
off
4. Press the [L] button.
Power-o the DR-01s.