Boss EQ-20 - Page 16

16
Returning Settings to Their Factory Defaults
You can return the settings in memories 1 through 9 to their factory defaults.
When this operation is carried out, everything that is now in memory is lost.
1. Switch off the power.
When running on battery power:
Disconnect the connection plug from the INPUT jack.
When running on power from an AC adaptor:
Disconnect the plug from the AC ADAPTOR jack.
2. While holding down the LIGHT button and the SELECT button, switch on the
power.
When running on battery power:
Insert the connection plug into the INPUT jack.
When running on power from an AC adaptor:
Insert the AC adaptor plug into the AC ADAPTOR jack.
When you release the button, “REST” appears on the display.
fig.21
* To cancel the operation, press the LIGHT button, the SELECT button, or the left or
right pedal.
3. Press the LIGHT button and the SELECT button at the same time.
“OK” appears in the display and the settings return to their factory defaults.
fig.22