5
Making the Connections
Connecting to the Guitar/Bass Amplifier
* When the unit is running on battery power, the power comes on when you insert the
connector plug into the INPUT jack.
* Before connecting or disconnecting the cord, be sure to lower the volume on the amp.
* To prevent malfunction and/or damage to speakers or other devices, always turn down
the volume, and turn off the power on all devices before making any connections.
* If there are batteries in the unit while an AC adaptor is being used, normal operation will
continue should the line voltage be interrupted (power blackout or power cord disconnection).
* Once you've gotten hooked up correctly (p. 5–6), be sure to observe the following order
when switching on the power to your equipment. By turning on devices in the wrong
order, you risk causing malfunction and/or damage to speakers and other devices.
When powering up: Turn on the power to your guitar amp (or the like)
last
.
When powering down: Turn off the power to your guitar amp (or the like)
first
.
* Always make sure to have the volume level turned down before switching on power.
Even with the volume all the way down, you may still hear some sound when the
power is switched on, but this is normal, and does not indicate a malfunction.
* When operating on battery power only, the unit’s indicator will become dim when
battery power gets too low. Replace the battery as soon as possible.
Connecting to Normal Input on the Guitar/Bass Amp
fig.01
Electric
Guitar
Electric
Bass
or
AC Adaptor
PSA-series
(option)
Guitar Amplifier Bass Amplifier
or
To Next Page
Loading...
