7
Operation
Pedal Operation
fig.04
When you switch on the power, the unit is set to the state it was in when
the power was last switched off (MANUAL/MEMORY, Memory Number).
Each press of the EFFECT ON/OFF
pedal switches effects on or off.
When effects are off, the sound
coming in through the INPUT jack is
output unchanged.
Each press of the MANUAL/
MEMORY pedal switches the
unit between “MANUAL”
and “MEMORY.”
This lights up
when set to
“MANUAL.”
This lights up
when effects
are on.
This lights up
when set to
“MEMORY.”
To Next Page
