Why is there an oscillating sound coming from my Boss ME-80?
An oscillating sound from your Boss Music Pedal often occurs when the value for any gain- or volume-related effects parameters is set too high. Try lowering these values to resolve the issue.
General| Bit rate | 24 bit |
|---|---|
| Product color | Gray |
| Sound effects | Delay, Looper |
| Sound effects quantity | - |
| Battery type | AA |
| Operating time | 7 h |
| Power source type | Battery, DC |
| Number of batteries supported | 6 |
| Display type | LCD |
| Built-in display | Yes |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Connectivity technology | Wired |
| 6.35 mm (1⁄4-inch) output | 1 |
Weight and Dimensions| Depth | 231 mm |
|---|---|
| Width | 447 mm |
| Height | 70 mm |
| Weight | 3600 g |
Details the Compressor/Effect 1 section, including its types and parameter settings.
Explains the Overdrive/Distortion effects, their types, and how to adjust their parameters.
Covers the Modulation effects, listing various types and their corresponding controls and settings.
Describes the Delay effects, including different delay types and how to set time, feedback, and level.
Details the amplifier simulation (Preamp) section, listing available amp models and their controls.
Covers the Reverb effects, specifying reverb types and size adjustments.
Describes the EQ/FX2 section, including the equalizer and other effects like Phaser and Delay.
Explains how to use the expression pedal for various effects like Wah, Pitch Shift, and others.
Provides instructions for powering the ME-80 unit and connected equipment on and off.
To Next Page
