Boss RC-600 User Manual (English)

Other manuals for Boss RC-600

Questions and Answers:

J
Johnny ThompsonAug 18, 2025
What to do if my Boss RC-600 displays 'TOO BUSY TOO BUSY OMSG'?
- C
  Calvin EdwardsAug 18, 2025
  The 'TOO BUSY TOO BUSY OMSG' error on your Boss Recording Equipment means it couldn't fully process the data. This can happen if you tried applying loop FX to a phrase with a significantly slower tempo than when it was recorded, so the data couldn't be processed quickly enough. To resolve this: 1. Lower the performance tempo. 2. If it is ‘TOO BUSY OMSG’, return to the tempo used during recording. 3. You can also save the current content to a memory. 4. If the error appears frequently, back up your data to a computer, perform a factory reset using “SYS+MEM,” and then restore your data.
V
Victor HoffmanAug 21, 2025
What to do if my Boss RC-600 shows 'UNSUPPORTED FILE'?
- C
  Christopher PowellAug 21, 2025
  If you see 'UNSUPPORTED FILE' on your Boss Recording Equipment, it means the audio file is unplayable. Make sure to check the format of the audio file. To import an audio file into the RC-600, use BOSS TONE STUDIO.
C
christopherbrownAug 23, 2025
What does 'STOP ALL&SAVE' mean on my Boss RC-600 Recording Equipment, and how do I fix it?
- K
  kevinfreyAug 23, 2025
  If your Boss Recording Equipment is displaying 'STOP ALL&SAVE', it means the operation you're trying to perform is not possible during recording, playback, overdubbing, or rhythm playback when there is also unsaved data. To solve this, stop all of these processes, and then save the memory.
D
David LopezAug 26, 2025
What does 'NOT EMPTY' mean on my Boss Recording Equipment, and how to resolve it?
- D
  Daniel CarrAug 26, 2025
  If the Boss Recording Equipment displays 'NOT EMPTY', it means you're trying to overwrite-save onto a memory that already has a phrase recorded in it. You can either clear the currently selected memory or select an empty memory.
J
jamesmooreAug 28, 2025
Why does my Boss RC-600 say 'OFFLINE'?
- J
  Julia EvansAug 28, 2025
  If your Boss Recording Equipment shows 'OFFLINE', there's likely a problem with the MIDI cable connection. Check the cable to ensure it hasn't been disconnected and that there are no shorts in the cable.
L
Lonnie MontgomeryAug 30, 2025
How to fix 'DATA DAMAGED' error on Boss RC-600?
- S
  Samantha ArnoldAug 30, 2025
  If your Boss Recording Equipment displays 'DATA DAMAGED', use the factory reset function and choose “SYS+MEM” to return the RC-600 to its factory settings.
S
Steven JonesSep 1, 2025
How do I resolve the 'BUFFER FULL' error on my Boss RC-600?
- R
  randallparkSep 1, 2025
  If your Boss Recording Equipment displays 'BUFFER FULL', reduce the number or size of MIDI messages transmitted to the RC-600.
K
Kristina JacksonSep 4, 2025
What does 'EVENT FULL' mean on Boss Recording Equipment?
- N
  Nicole RollinsSep 4, 2025
  If your Boss Recording Equipment shows 'EVENT FULL', save the memory.
M
Melinda MedinaSep 6, 2025
What does 'DATA TOO LONG' mean on Boss RC-600?
- M
  Michael WilliamsSep 6, 2025
  The 'DATA TOO LONG' message on your Boss Recording Equipment means the recording time or audio file length exceeds 1.5 hours. Ensure that your recording or file is shorter than this limit.
J
John RaySep 8, 2025
What should I do if my Boss Recording Equipment says 'MEMORY FULL' during recording?
- C
  cdavenportSep 8, 2025
  The 'MEMORY FULL' message on your Boss Recording Equipment indicates that the unit's memory is insufficient. Clear unneeded memories and try recording again. Note that recording or overdubbing might end mid-way if this message appears.

Boss RC-600 Specifications

General

Bit rate	32 bit
Product color	Red
Sound effects	Looper
Sound effects quantity	200
MIDI in	No
MIDI out	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired
6.35 mm (1⁄4-inch) output	1
Display type	LCD
Power source type	AC