- 11 -
GLOSSARY
CFM:
Cubic feet per minute.
SCFM:
Standard cubic feet per minute; a unit of measure of air delivery.
PSI:
Pounds per square inch; a unit of measure of pressure.
Code Certification:
Products that bear one or more of the following marks:
UL, CUL, ETL, CETL
, have
been evaluated by
OSHA
certied independent safety laboratories and meet the applicable Underwriters
Laboratories Standards for Safety.
RPM:
Revolutions per minute; is a measure of the frequency of a rotation
BPM:
Beats per minute.
NPT:
National pipe thread (tapered thread); is a U.S. standard for tapered threads used on threaded
pipes and ttings.
ID:
Inner diameter
MAINTENANCE
Any excess oil in the motor is immediately expelled from the exhaust port. Always direct exhaust port
away from people or objects.
STORAGE:
The air tool must be lubricated before storing.
Follow the “Lubrication” instruction with exception of step 4.
To Next Page
Loading...
