Bostitch T40 User Manual

BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUES-
TIONS, CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA, TODOS LOS OPERADORES DEBERÁN ESTUDI-
AR ESTE MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE
SEGURIDAD Y LAS INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA HER-
RAMIENTA PARA FUTURA REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON SU
REPRESENTANTE DE BOSTITCH O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER
UNE ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX AVER-
TISSEMENTS. GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS
AVEZ DES QUESTIONS, CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE CONCESSION-
NAIRE BOSTITCH.
OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
T40
PNEUMATIC STAPLER
ENGRAPADORA NEUMÁTICA
AGRAFEUSE PNEUMATIQUE
103698REVF 8/99
Stanley Fastening Systems

Bostitch T40 Specifications

General

Brand	Bostitch
Model	T40
Category	Tools
Language	English

Summary

Safety Instructions and Warnings

Eye Protection Requirements

Mandatory eye protection conforming to ANSI Z87.1-1989 for frontal and side protection.

Air Supply and Connections

Power Source and Pressure Warnings

Warnings against using improper gases and exceeding pressure limits to prevent explosion or bursting.

Connection and Trigger Safety

Ensures connector safety and cautions against pulling trigger while connected to air.

Disconnect Air Supply Procedures

Lists necessary procedures for disconnecting air supply before maintenance or adjustments.

Loading and Operation Guidelines

Loading Tool Safety Warnings

Avoid placing hands in discharge area, pointing at people, horseplay, or pulling trigger during loading.

Safe Tool Handling and Operation

Handle tool with care, avoid horseplay, check contact arm, keep clear of discharge area, avoid fastener deflection.

Tool Specifications and Operation Modes

Operating Pressure and Air Supply

Operation Modes: Contact, Sequential, Trigger

Detailed Air Supply and Lubrication

Air Supply and Connection Requirements

Details hose, fitting, supply source, regulator, and filter requirements for safe operation.

Lubrication Guidelines

Loading the T40 Stapler

Loading Tool Safety and Procedures

Reinforces safety warnings and provides step-by-step guidance for loading staples.

Tool Operation Procedures

Pre-Operation Checklist and Warnings

Contact Trip Operation Methods

Sequential Trip Operation Mode

Tool Operation Checks and Safe Practices

Operation Mode Checks

Additional Safe Operation Guidelines

Troubleshooting Guide

Troubleshooting Leaks and Cycling Failures

Troubleshooting Power, Feed, and Jams