Bostitch SB-125BN User Manual

OPERATION and MAINTENANCE MANUAL
MANUAL DE OPERACIÓN Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
FINISH TOOLS
HERRAMIENTAS DE ACABADO
OUTILS DE FINITION
107674REVF 03/06
SB-150SX SB-125BN
SB-1664FN
SB-1842BN
SB-1850BN
SB-2IN1
BEFORE OPERATING THIS TOOL, ALL OPERATORS SHOULD STUDY THIS MANUAL TO
UNDERSTAND AND FOLLOW THE SAFETY WARNINGS AND INSTRUCTIONS. KEEP THESE
INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS,
CONTACT YOUR BOSTITCH REPRESENTATIVE OR DISTRIBUTOR.
ANTES DE OPERAR ESTA HERRAMIENTA,TODOS LOS OPERADORES DEBERÁN ESTUDIAR ESTE
MANUAL PARA PODER COMPRENDER Y SEGUIR LAS ADVERTENCIAS SOBRE SEGURIDAD Y LAS
INSTRUCCIONES. MANTENGA ESTAS INSTRUCCIONES CON LA HERRAMIENTA PARA FUTURA
REFERENCIA, SI TIENE ALGUNA DUDA, COMUNÍQUESE CON SU REPRESENTANTE DE BOSTITCH
O CON SU DISTRIBUIDOR.
LIRE ATTENTIVEMENT LE PRÉSENT MANUEL AVANT D’UTILISER L’APPAREIL. PRÉTER UNE
ATTENTION TOUTE PARTICULIÈRE AUX CONSIGNES DE SÉCURITÉ ET AUX AVERTISSEMENTS.
GARDER CE MANUEL AVEC L’OUTIL POUR FUTUR RÉFÉRENCE. SI VOUS AVEZ DES QUESTIONS,
CONTACTEZ VOTRE REPRÉSENTANT OU VOTRE CONCESSIONNAIRE BOSTITCH.
Stanley Fastening Systems L.P.

Bostitch SB-125BN Specifications

General

Operating Pressure	70-120 psi
Magazine Capacity	100
Power Source	Pneumatic
Depth Adjustment	Yes
Fastener Size	18 Gauge
Type	Brad Nailer
Fastener Type	18-gauge brad nails
Fastener Length	5/8 inch to 2-1/8 inch

Summary

Limited Warranty

Safety Instructions

Air Supply and Connections Safety

Warnings and requirements for air supply, fittings, and connections.

Loading Tool Safety

Operation Safety

Maintenance Safety

Tool Specifications

Operation Modes

Contact Trip Operation

Sequential Trip Operation

Air Supply and Connections

Supply Source and Regulator

Operating Pressure and Filter

Maintaining correct operating pressure and the role of air filters.

Lubrication

Loading Instructions: SB-1664FN

Accidental Injury Prevention During Loading

Crucial safety precautions to prevent accidental firing during loading.

Tool Operation

Contact Trip Operation Details

Detailed explanation of how to use the Contact Trip system.

Sequential Trip Operation Details

Detailed explanation of how to use the Sequential Trip system.

Tool Operation Checks

Contact Trip Operation Checks

Step-by-step checks for Contact Trip functionality.

Sequential Trip Operation Checks

Step-by-step checks for Sequential Trip functionality.

General Safe Operation Guidelines

Maintaining the Pneumatic Tool

Air Supply Pressure and Volume

Trouble Shooting

Depth Adjustment

Fastener Control Adjustment

Adjusting Fastener Control