1. Press and hold [RECORD/MODE] for five seconds.
ð
The LED above the button lights up.
2. Press [PROGRAM] or [STROBE] to select chase or strobe programmes.
ð
The LED next to the corresponding button lights up.
3. Press [UP] or [DOWN] to select the desired programme.
4. Press [RECORD/MODE].
5. Use [UP] or [DOWN] to select the scene where you want to add another.
6. Now create a scene on your DMX controller. If you want to add this scene, press
[RECORD/MODE].
Adding a scene
Operating
SD-10
25
DMX recorder
To Next Page
Loading...
Need help?
General